Up to 38 % savings with Reduced Gap Technology

Innovación

Up to 38 % savings with Reduced Gap Technology

19 de abril de 2016

The groove angle has a direct impact on the efficiency and productivity of welding heavy metal structures. Kemppi's new solution, Reduced Gap Technology (RGT) changes the understanding of narrow gap welding. The new technology challenges conventional joint design principles.

Petteri Jernström

In a narrow groove, the welding arc is difficult to control without equipment specially designed for the application. Our technology allows reliable and efficient narrow gap welding with no need for special equipment or accessories for material thicknesses of up to 30 mm. The technology provides many benefits which result in lower investment, repair and labor costs. It enables significant cost savings through reductions in welding time and filler material consumption.

Arctech Helsinki Shipyard has gained speed and quality with Kemppi’s technology

One success story has been Arctech Helsinki Shipyard Oy, which has used Kemppi’s RGT in mechanized welding in the construction of icebreakers. Welding work has gained speed, because the groove volume and the number of passes to be welded have decreased. This has reduced the need for filler material. Mechanization has also made the welds more consistent in quality.

25-38% savings on filler material and arc time

  • Groove angle 20° instead of 45°

  • Only five passes instead of seven

  • 25% saving on filler material

  • 38% saving on arc-on time

At the core of Kemppi’s RGT solution is an intelligent arc control system. A short, stable, and efficient arc minimizes the risk of incomplete penetration and lack of fusion, because the arc is always focused precisely at the desired point of the groove. The groove angle can be lowered to 20 degrees instead of the normal 45-60 degrees. The lower the groove angle, the fewer weld passes are needed to complete the joint. It reduces the welding time and the consumption of filler material, and makes the material less prone to distortion. The method is excellently suited to both butt and fillet joints, no matter the welding position.

Petteri Jernström
Author

Petteri Jernström

Vice President, Technology at Kemppi Oy until February 2020. A technology innovator with extensive experience across a variety of sectors and roles in the welding industry. Curious about discovering, learning, and inventing new ways of doing things. Petteri holds a Doctor of Science degree in Welding Technology from the Lappeenranta University of Technology, Finland.

Más publicaciones del blog

Wise pipe welding at IIW 2015

Wise pipe welding at IIW 2015

Once a year, all welding professionals in the world gather together to share their expertise and insights on the welding industry. The 68th IIW Annual Assembly and International Conference is currently in motion in Helsinki, Finland.

Soldadura manual

The significance of usability in industrial welding

The significance of usability in industrial welding

We asked two professional welders – Meyer’s Jukka Hahko and Dinolift’s Pasi Laakso – what good usability means in industrial welding.

Innovación

Future welding - as seen by the welders

Future welding - as seen by the welders

In the world of welding, innovation is guided by the needs of both the industries using welding systems, and the individual welders who work with them from day to day. To draw a picture of the future of welding, we asked two welders to give us their insights on the road ahead.

Personas

How does steel welding benefit from special processes?

How does steel welding benefit from special processes?

Welding mild steels may often be considered a simple task. However, welding these steels has specific characteristics that can make the welding process challenging.

Soldadura manual, Fundamentos de soldadura

New Kemppi Robotics Team

New Kemppi Robotics Team

Achieving strategic goals and enhancing customer experience

Personas

How to choose the MIG/MAG welding torch

How to choose the MIG/MAG welding torch

MIG/MAG welding is one of the most common and versatile welding processes. It is used for various applications, such as automotive, construction, fabrication, and maintenance. However, choosing a suitable welding torch for your job is essential to achieve optimal results.

Soldadura manual, Fundamentos de soldadura

Suscríbase a nuestro boletín y sea u no de los primeros en conocer las últimas noticias de Kemppi.

Al suscribirse, acepta recibir correos electrónicos de marketing de Kemppi.

El precursor de la soldadura por arco

Kemppi es el líder en diseño de la industria de la soldadura por arco. Nos comprometemos a impulsar la calidad y la productividad de la soldadura mediante el desarrollo continuo del arco de soldadura, trabajando por un mundo más verde y más igualitario. Kemppi suministra productos sustentables avanzados, soluciones digitales y servicios para profesionales, desde empresas de soldadura industriales hasta contratistas individuales. La facilidad de uso y la fiabilidad de nuestros productos son nuestros principios rectores. Trabajamos con una red de socios altamente cualificados que abarca más de 70 países para que nuestra experiencia esté presente a escala local. Con sede en Lahti (Finlandia), Kemppi cuenta más de 650 profesionales en 16 países y tiene unos ingresos de 209 millones de euros.

Kemppi – Designed for welders

Copyright © 2024 Kemppi Oy