Standards in welding provide basis for the whole welding industry

Soudage manuel

Standards in welding provide basis for the whole welding industry

19 juin 2018

Welding standards support the whole welding industry. They affect the industry and welding company operations on a wide scale from welding equipment to welding management software, services and documentation.

Reetta Verho

The importance of standards in the welding industry is constantly increasing as regulations on safety and quality are tightened. Compliance with standards tells customers that the quality of products and services is at the required level.

Discussion around welding procedure qualification standard ISO 15614-1 update

Publishing a new version of a much-applied standard usually brings out numerous questions; exactly what is meant by the revised standard? Interpretations vary between countries, and before the interpretations become established, there are variations of how the standard is applied. There’s a risk that different interpretations will live on. It is therefore important that there are representatives from many countries in the global standardization work.

In June 2017, an updated version of the standard for welding procedure qualification tests, ISO 15614-1, was released. The welding procedure qualification standard is one of the most important and most used standards applied to welding industry globally. I summarize below the most significant changes in the standard revision. Some details are still being discussed, such as the part concerning the waveform controlled welding.

Most important changes in the welding procedure qualification standard ISO 15614-1 update:

The new standard introduces two-level system for welding procedure tests. In Level 2, the extent of testing is greater, and the qualification ranges are more restrictive than in Level 1, which requires only limited amount of testing.

Location of test pieces has changed. The location of the test bars for butt welds in plate applications has changed, resulting in a change in the welding direction. Also, the welding direction for butt joints in pipes has changed. No changes have taken place with regard to fillet joints. The new standard has not brought major changes to the acceptance limits. With regard to destructive material testing, the new ISO standards have been updated. As before, the standard allows for the welding of a new test specimen if a specimen fails to meet the requirements for the non-destructive testing. The new standard offers the alternative of performing an analysis in order to determine the root cause.

The standard permits performing new destructive material tests if such tests have been failed in the course of testing. The same applies to the welding of a new sample piece from which new test bars can be extracted. A macro test can be repeated if all the other destructive tests have been passed.

Changes in qualification ranges in MIG/MAG welding. For process-specific qualification ranges, the most significant changes are related to gas-shielded arc welding of metal. The qualification range for shielding gas in MAG welding has been restricted. With regard to CO2 content, the new standard permits a deviation of ±20% relative to the composition used in the welding procedure qualification test.

Changes in waveform controlled welding. According to the new standard, ”when a power source with waveform control is used, the power source manufacturer and waveform control mode shall be recorded on the WPQR including all other pertinent information. Change from one manufacturer to another manufacturer of the power source or a change in the waveform control mode requires a new qualification.”

Most of the power sources manufactured in the 1990’s or later are waveform controlled. Welding with the modern equipment is therefore waveform controlled welding by default, making the welding machine a pivotal variable. When a waveform controlled welding process is not used in the welding procedure qualification test, the welding machine is not a pivotal variable. According to the revised standard, the manufacturer and identifying information of the welding machine must be noted in the WPQR.

Updated revision coming up

The majority of the countries involved in standardization work voted in June 2018 for removing the part concerning the waveform controlled welding from the new standard. An updated revision without the waveform controlled welding section will be published this year.

It is extremely important to maintain the high quality and competitiveness of the European welding industry and to develop new and effective practices built on standards. Participating the standardization work means that we can anticipate in what direction the standards are evolving and we can ensure that Kemppi meets the requirements up-to-date. At the same time, we are involved in discussions with welding industry experts and influencers and keep ahead in the latest industry events. When our welding equipment, services and welding instructions are in line with the latest industry standards, our customers receive the best service possible.

Reetta Verho
Author

Reetta Verho

Manager, Welding Services at Kemppi Oy. International Welding Engineer (IWE) who is an active member in ISO standardization committees. Board member in The Welding Society of Finland. Passionate about welding quality and the development of welding production. Member of: K105 National mirror committee for welding, ISO/TC44/SC10 Quality management in the field of welding ISO/TC44/SC11 Qualification requirements for welding and allied processes personnel.

Plus d'articles de blog

Stop the hassle and just get to work

Stop the hassle and just get to work

Imagine 40 welders in a workshop. Each of them has 4–5 different welding qualifications which put the total at around a hefty 200 qualification certificates. As usual, these documents have to be prolonged every six months.

Numérisation

What could you save by digitalizing your WPS?

What could you save by digitalizing your WPS?

The increasing complexity of welded products has made the development of welding procedure specifications (WPS) more time-consuming. As industries move to subcontractor and multi-site based operating models, WPS management also becomes more demanding.

Numérisation

How do standards challenge the European welding industry?

How do standards challenge the European welding industry?

The European welding industry is recreating itself. Our ambition is to transform the industry from 3D – dirty, dull, and dangerous – to 3C – cool, clean, and clever. We are entering an era of new buyer power, arising from redefined expectations for welding quality and documentation throughout the entire welding value chain.

Soudage manuel

How does steel welding benefit from special processes?

How does steel welding benefit from special processes?

Welding mild steels may often be considered a simple task. However, welding these steels has specific characteristics that can make the welding process challenging.

Soudage manuel, L'ABC du soudage

New Kemppi Robotics Team

New Kemppi Robotics Team

Achieving strategic goals and enhancing customer experience

Les personnes

Comment choisir sa torche de soudage MIG/MAG

Comment choisir sa torche de soudage MIG/MAG

Le soudage MIG/MAG est l'un des procédés de soudage les plus courants et les plus polyvalents. Il est utilisé pour diverses applications, telles que l'automobile, la construction, la fabrication et la maintenance. Cependant, il est essentiel de choisir une torche de soudage adaptée à votre travail pour obtenir des résultats optimaux.

Soudage manuel, L'ABC du soudage

Inscrivez-vous à notre newsletter et soyez parmi les premiers à découvrir les dernières actualités de Kemppi.

En vous abonnant, vous acceptez de recevoir des e-mails marketing de Kemppi.

Le précurseur du soudage à l'arc

Kemppi s’impose comme le leader en matière de conception dans l’industrie du soudage à l'arc. Grâce à l'optimisation continue de l'arc de soudage, nous nous engageons à améliorer la qualité et la productivité du soudage, tout en œuvrant pour un monde plus respectueux de l'environnement et plus équitable. Kemppi propose des produits durables, des solutions numériques et des services destinés aux professionnels, qu'il s'agisse de grandes entreprises industrielles ou d’entrepreneurs. La fiabilité et la simplicité d'utilisation de nos produits sont au cœur de notre philosophie. Fort d’un réseau de partenaires hautement qualifiés dans plus de 70 pays, nous rendons notre expertise accessible à l'échelle mondiale. Basée à Lahti, en Finlande, Kemppi compte plus de 650 professionnels dans 16 pays et a réalisé un chiffre d'affaires de 209 millions d'euros en 2023.

Kemppi – Designed for welders

Copyright © 2024 Kemppi Oy