Say bye-bye to costly weld repairs with 100% WPS compliance

Digitalisering

Say bye-bye to costly weld repairs with 100% WPS compliance

18. september 2017

No matter who you are, what you do or where you are in the world, you are never far from a weld. People might not always realize it when they go about their business, but high-quality welding has a daily role in our built environments. Welds hold buildings, ships and steel frames hidden within walls securely together.

Vesa Tiilikka

In short, welds form an integral part of the infrastructure of society, impacting millions upon millions of lives each day. People rely on physical structures for safety – every day. That’s why the role and responsibility of constructors and manufacturers is increasingly emphasized and reflected in tightening welding standards.

We’re all familiar with NDT methods, from visual inspection to X-rays. Although NDT methods can reveal air bubbles and cracks on the surface, they don’t spot absolutely everything. To the naked eye, the weld can look perfectly fine and well within the requirements of the WPSs. But if the heat input has been too high, the granules may be too big.

This will likely cause the weld to break at some point. Despite thorough inspections, duds sometimes make their way to oil rigs out on the open sea or gas pipelines on inhospitable tundra. It’s an accident waiting to happen – and when a weld breaks due to environmental or other stresses, you may have an environmental disaster to deal with.

Numbers don’t lie

To keep less than perfect welds away from crucial infrastructure, the quality management of welding production itself must be top-notch. You have to catch any deviations before they leave production to keep your customers and your bottom line happy.

You want numbers, right? Here’s one: 400 euros. That’s the cost of fixing just one meter of faulty welding. It comprises:

  • planning of the rework procedure

  • time required to move the faulty part to the repair location

  • time to transfer the welder from one location to another

  • arc gouging or grinding

  • heat treatment

  • repair welding

  • re-inspection by an independent third-party and reporting

Now, imagine skipping all of that hassle.

Here’s another figure: 100%. That’s the level of traceability any welding production manager wants to see. It’s also what WeldEye for Welding Quality Management can do. It’s a universal software solution for verifying welding quality compliance with the WPSs. By collecting welding parameter data digitally, the system produces valuable information about basic quality documentation items with weld-specific traceability.

You will also be immediately notified about any welding deviations, which enables real-time quality control, and ultimately reduces overhead costs.

Sound like something you could use in your welding production? Head on over to www.weldeye.com to read more or just drop us a line.

Vesa Tiilikka
Author

Vesa Tiilikka

Product Manager, Software at Kemppi Oy.

Flere blogginnlegg

Stop the hassle and just get to work

Stop the hassle and just get to work

Imagine 40 welders in a workshop. Each of them has 4–5 different welding qualifications which put the total at around a hefty 200 qualification certificates. As usual, these documents have to be prolonged every six months.

Digitalisering

Can you afford to ignore the value of welding knowledge?

Can you afford to ignore the value of welding knowledge?

The welding production chain is complex. Besides the actual welding work, one has to consider resource planning, welding procedure and qualification management, documentation, WPS compliance, standardization and requirements.

Digitalisering

Pioneering is a state-of-mind – now and 25 years ago

Pioneering is a state-of-mind – now and 25 years ago

Experimenting with different ideas, fast and small, then scaling up boldly and even faster - this is my experience of pioneering after a couple of months as Chief Digital Officer at Kemppi. Experimenting was present at Kemppi already 25 years ago, when we developed a new, numeric way to manage arc characteristics and invented the first digital welding power source in the world.

Innovasjon

How does steel welding benefit from special processes?

How does steel welding benefit from special processes?

Welding mild steels may often be considered a simple task. However, welding these steels has specific characteristics that can make the welding process challenging.

Manuell sveising, Sveise-ABC

New Kemppi Robotics Team

New Kemppi Robotics Team

Achieving strategic goals and enhancing customer experience

Mennesker

How to choose the MIG/MAG welding torch

How to choose the MIG/MAG welding torch

MIG/MAG welding is one of the most common and versatile welding processes. It is used for various applications, such as automotive, construction, fabrication, and maintenance. However, choosing a suitable welding torch for your job is essential to achieve optimal results.

Manuell sveising, Sveise-ABC

Abonner på nyhetsbrevet vårt og vær blant de første som får de siste nyhetene fra Kemppi.

Ved å abonnere godtar du å motta markedsførings-e-poster fra Kemppi.

Foregangsbedriften innen lysbuesveising

Kemppi er designleder i sveiseindustrien. Vi er forpliktet til å øke kvaliteten og produktiviteten til sveiseren ved kontinuerlig utvikling av lysbuen og ved å arbeide for en grønnere og mer likeverdig verden. Kemppi leverer bærekraftige produkter, digitale løsninger og tjenester til fagfolk fra industrielle sveisebedrifter til enkeltentreprenører. Brukervennligheten og påliteligheten til produktene våre er vårt ledende prinsipp. Vi opererer med et svært dyktig partnernettverk som dekker over 70 land for å gjøre sin ekspertise lokalt tilgjengelig. Kemppi har hovedkontor i Lahti, Finland, og sysselsetter over 650 fagfolk i 16 land og har en omsetning på 209 MEUR.

Kemppi – Designed for welders

Copyright © 2024 Kemppi Oy