How fresh is your air?

Veiligheid

How fresh is your air?

7 november 2022

Things move fast in the welding industry and it's easy to forget about changing your particle filters. But sometimes small things can make a big difference. Let's take a closer look at three reasons why changing particle filters regularly is very important.

Roger Rasmussen

1. Safe breathing

Perhaps the most obvious reason to change your particle filters is to breathe safely on the job. Maintaining a steady flow of fresh air is a key part of welding safety – fresh air makes welding more enjoyable, while improving clarity and focus.

If we look at it another way, a clogged or dirty filter can have serious implications for welding safety by compromising the performance of your fresh air system. While the long-term consequences of breathing small airborne particles is still debated by many, the science behind the effects of breathing in dust particles is remarkably clear.

Dust particles smaller than 10 μm can get trapped in the nose, mouth and upper respiratory tract, contributing to respiratory disorders like asthma, tracheitis, pneumonia, allergic rhinitis and silicosis. Fine dust particles can also penetrate the lower respiratory tract and contribute to cardiovascular disorders by entering the bloodstream.

­Source: WMO article on atmospheric dust.

The peace of mind and long-term health benefits of breathing safe air far outweigh the relatively small cost of changing your particle filters once a month.

Welding safety infograph

Read more about welding safety

2. Optimal equipment performance

Many people wait for the 'change filter' alarm on their respirator. But did you know that the alarm is not a polite reminder? It's actually an indication that the filter is well beyond optimal performance. Think of it like a fault code on your car, when the light comes on the dashboard, the performance of the car is already affected.

Image of a new, clean filter and a used, dirty filter.

How fresh is your air? Change the filter regularly.

Using a dirty filter affects the positive pressure generated by your respirator. Positive pressure is needed to keep contaminated air out, while ensuring a steady flow of fresh air into the helmet. Using a respirator without positive pressure places unnecessary stress and load on the mechanical parts of your breathing system. In the long run, this can lead to unscheduled repairs and higher maintenance costs.

Changing filters once a month is an important part of good maintenance hygiene. It is an easy way to ensure trouble free operation of your Kemppi fresh air system.

Increased productivity

Being interrupted by an equipment issue is an unwelcome distraction. Experts know that maintaining safety equipment is critical to creating a work environment where you can devote your full attention to the task. But with a dirty particle filter, there is a real risk that you won't make it through a full day without charging your respirator.

A dirty or clogged filter restricts air flow and forces the fan to compensate by spinning faster than normal. The increased load on the fan can significantly reduce the battery life of your respirator and force you to charge it sooner.

A chart of respirator battery lifetime regarding filter condition

The battery lifetime for a standard duty (SD) battery and a heavy duty (HD) battery.

Maintaining proper air flow increases productivity by ensuring that a welder is free to do their job without worrying about being interrupted by a low battery level.

We want to make it easy to change particle filters – See our free filter pack offer now

Watch also the evergreen video about how to choose a suitable filter for the welding respiratory system.

Roger Rasmussen
Author

Roger Rasmussen

Vice President, Torches, Consumables and Safety at Kemppi Oy

Meer blogberichten

There is something in the air – invest in welder's safety

There is something in the air – invest in welder's safety

You’ve probably seen pictures of contaminants? Those tiny little particles that can't be seen with the eye but look horrifying through the microscope lens. If you could actually see them floating around you, would you not use the maximum protection available?

Veiligheid

Welding Fume Extraction Efficiently Reduces Occupational Health Risks

Welding Fume Extraction Efficiently Reduces Occupational Health Risks

Concerns over the risks of welder exposure to harmful welding fumes have initiated EU and national-level actions. The revised version of ISO standard 21904-3 defines the method for measuring the capture efficiency of welding fume extraction guns. Kemppi has conducted tests according to the new standard with Flexlite GF, a new fume-extracting MIG welding gun with convincing results.

Veiligheid

Waarborg de verplichte werkveiligheid

Waarborg de verplichte werkveiligheid

Is het verplicht om de veiligheidshelm te dragen en de werknemers voldoende oogbescherming te bieden? In de meeste gevallen wel. Hoe los je dan de werkveiligheid op als je even tussen de andere werkzaamheden door last? Lees verder, wij hebben de oplossing!

Veiligheid

Expert insights: Choosing welding helmets and respiratory protection – prioritizing safety over cost

Expert insights: Choosing welding helmets and respiratory protection – prioritizing safety over cost

Selecting the right welding helmet and respiratory protection system is crucial for protecting welders in high-risk environments. While cost may factor into decisions, the need for effective, high-quality protection should always come first.

Veiligheid, Mensen

How does steel welding benefit from special processes?

How does steel welding benefit from special processes?

Welding mild steels may often be considered a simple task. However, welding these steels has specific characteristics that can make the welding process challenging.

Handmatig lassen, ABC van het lassen

New Kemppi Robotics Team

New Kemppi Robotics Team

Achieving strategic goals and enhancing customer experience

Mensen

Schrijf u in op onze nieuwsbrief en wees als een van de eersten op de hoogte van het laatste nieuws van Kemppi.

Door u te abonneren, gaat u ermee akkoord marketing-e-mails van Kemppi te ontvangen.

De voorloper op het gebied van booglassen

Kemppi is dé toonaangevende ontwerper in de booglasindustrie. We zijn vastbesloten om de kwaliteit en productiviteit van lassen aan te jagen door voortdurend verder te ontwikkelen en te werken aan een groenere meer gelijke wereld. Kemppi levert geavanceerde duurzame producten, digitale oplossingen en diensten voor professionals aan zowel industriële lasbedrijven als zelfstandige aannemers. Het gebruiksgemak en de betrouwbaarheid van onze producten zijn onze leidraad. We werken met een netwerk van zeer vakkundige partners in meer dan 70 landen om onze expertise beschikbaar te stellen. Kemppi, waarvan het hoofdkantoor is gevestigd in Lahti, Finland, heeft meer dan 650 professionals in 16 verschillende landen in dienst en genereert een jaaromzet van 209 miljoen euro.

Kemppi – Designed for welders

Copyright © 2024 Kemppi Oy