Welding torch testing proves quality and durability

Innovatie

Welding torch testing proves quality and durability

14 juli 2019

Kemppi's new Flexlite TX welding torch range offers cutting-edge features for precise TIG welding. The goal of the product development team was nothing less than to make the best TIG welding torches in the world, with compact neck design for demanding welding applications and consumables that guarantee the best welding quality and value. User experiences, tests, and measuring prove that the goal has been achieved successfully.

Paavo Sivula

The design of the Flexlite TX torches adapts to the position of the welder's hand and reduces wrist loading. A patent is pending for the innovative handle. The ergonomics of manual welding has also been taken into account in the materials: the torch handles are made of silicone rubber, which provides both flexibility and a firmer grip with leather gloves compared to plastic handles.

Measurements and heating test according to strict standards

Maximum durability of TIG welding torches and the safety of the welder are ensured with resistance and strength measurements in accordance with the standard IEC-60974-7. The standard defines the limits for torch heating. The handle temperature is allowed to be at maximum 30 Kelvins higher than the environment temperature. With the cable set, the limit is 40 Kelvins.

The heating test defines loads per specific torch, e.g. what welding current limit can be welded with the torch. In the heating test, a water-cooled copper block is being welded and the heating of the torch is measured with electronic sensors. The optimum points of the sensors are located with a thermal camera to ensure all the hot spots are included in the measurements. The temperature of the hottest point is reported. A standardized heating test guarantees that the torch welding efficiency is as promised. The heating test measurement cycle lasts for a minimum of 30 minutes, or until the temperature rises at maximum to two Kelvins per hour.

Testing welding torch materials and consumables

In addition to mandatory standard tests, Kemppi carries out a lot of additional testing to ensure top-quality products. The Flexlite TX welding torches were tested with several cables made of different materials from different manufacturers before the final choice. Cable materials have been selected with an emphasis on the optimum balance of durability and elasticity and, in the case of the gas cable, the purity of the shielding gas.

The consumables which have a significant role in the torch's welding quality, such as gas lens equipment, are tested through gas shielding tests. The gas flow is examined with Schlieren imaging technology in Kemppi's welding laboratory.

Kemppi's gas lenses have multiple layers of gas-diffusing mesh, which significantly improve laminar gas flow and makes the welding machine's operation extremely efficient. The video below shows a remarkable difference between the shielding gas flow from a Kemppi gas lens-equipped TIG torch and the performance from a market standard specification.

Maximum durability is assured in a tough robotic bending test

The robot bending test is the most demanding test for the entire torch assembly. The test method has been developed by Kemppi to ensure that the torch is mechanically durable through and through in terms of cable materials, copper cable, and water circulation in a water-cooled torch. The trajectories programmed in the robot include all possible welding positions. The robot bends the welding torch with one kilo's extra weight in every 40-second cycle. The test is one of the toughest tests on the TIG torches and thus ensures their maximum durability.

Discover the Flexlite TX welding torch range for TIG welding

Paavo Sivula
Author

Paavo Sivula

Manager, TIG Torch Development at Kemppi Oy. Several years of experience in product development with technical responsibility over TIG welding torches. Always questioning the conventional and finding new ways of creating better tools for the welders.

Meer blogberichten

MicroTack revolutionizes the tack welding of thin sheet metal

MicroTack revolutionizes the tack welding of thin sheet metal

Tack welding is one of the most important work phases before welding. In tacking, the structural parts are combined with short tack welds in preparation for the actual welding. The tack welds keep the parts in the correct position in relation to each other until the welding has been done.

Innovatie

The diversity of welding

The diversity of welding

Joonas Innanen, 27, is one of the newer generation of welders. Although he studied traditional methods of welding from MIG to TIG, he has also adopted new technologies during his career.

Mensen

Welding instructors – true chameleons

Welding instructors – true chameleons

From Slovakia to China, Saudi Arabia to Mexico, through Israel and all over Finland. These are some of the many places where his work has taken Jarkko Anttonen. Anttonen is one of the welding instructors in the Welding Services team at Kemppi. They're based in the Application Training Center at the Kemppi headquarters in Lahti, Finland. But as you can see, Anttonen's list of travel destinations is long. You could say that a welding instructors' actual workplace is basically the whole world.

Mensen

How does steel welding benefit from special processes?

How does steel welding benefit from special processes?

Welding mild steels may often be considered a simple task. However, welding these steels has specific characteristics that can make the welding process challenging.

Handmatig lassen, ABC van het lassen

New Kemppi Robotics Team

New Kemppi Robotics Team

Achieving strategic goals and enhancing customer experience

Mensen

How to choose the MIG/MAG welding torch

How to choose the MIG/MAG welding torch

MIG/MAG welding is one of the most common and versatile welding processes. It is used for various applications, such as automotive, construction, fabrication, and maintenance. However, choosing a suitable welding torch for your job is essential to achieve optimal results.

Handmatig lassen, ABC van het lassen

Schrijf u in op onze nieuwsbrief en wees als een van de eersten op de hoogte van het laatste nieuws van Kemppi.

Door u te abonneren, gaat u ermee akkoord marketing-e-mails van Kemppi te ontvangen.

De voorloper op het gebied van booglassen

Kemppi is dé toonaangevende ontwerper in de booglasindustrie. We zijn vastbesloten om de kwaliteit en productiviteit van lassen aan te jagen door voortdurend verder te ontwikkelen en te werken aan een groenere meer gelijke wereld. Kemppi levert geavanceerde duurzame producten, digitale oplossingen en diensten voor professionals aan zowel industriële lasbedrijven als zelfstandige aannemers. Het gebruiksgemak en de betrouwbaarheid van onze producten zijn onze leidraad. We werken met een netwerk van zeer vakkundige partners in meer dan 70 landen om onze expertise beschikbaar te stellen. Kemppi, waarvan het hoofdkantoor is gevestigd in Lahti, Finland, heeft meer dan 650 professionals in 16 verschillende landen in dienst en genereert een jaaromzet van 209 miljoen euro.

Kemppi – Designed for welders

Copyright © 2024 Kemppi Oy