WiseThin+ short arc process

WiseThin+ short arc process

Optimized short arc process for sheet metal and position welding.

20% faster welding

Weld faster compared to traditional short arc welding.

40% lower shielding gas costs

Lower shielding gas costs due to a possibility to use CO₂.

25% less heat input

Lower heat input results in less deformation and less postprocessing.

Increase welding speed and achieve better quality

WiseThin+ is a tailored shot arc process for manual and automated thin sheet welding. The WiseThin+ process is based on precise voltage measurement and current control. Mixed gas welding characteristics with pure CO₂. Expands the parameter window and thus reduces the need to use smaller wire diameters. Soft and pleasant arc characteristics. Excellent welding characteristics for welding plate thicknesses 0.8…3.0 mm. Reduces heat input and thus deformation – excellent arc ignition for tack and intermittent welds.

WiseThin+ short arc process

Increase welding speed and achieve better quality

No products available.

Find a dealer

20% faster welding with WiseThin+

WiseThin+ welding gives excellent welding characteristics for position welding in thicker plates. The arc is steady and easy to handle, and the arc sound is always uniform because of stable short-circuiting. The weld pool flows smoothly to the joint, and there is no risk of undercutting. As a result, there are no spatters. Position PF, 1.2 mm Fe solid wire, Ar+ CO₂ or CO₂ shielding gas, Plate thickness 6.0 mm + 6.0 mm, Wfs = 2.65 m/min → I = 105 A and U = 18.5 V, Fine-tuning setting +1.5.

Save 40% in shielding gas costs

With the WiseThin+ optimized welding process, you can weld with CO₂ shielding gas and still get the same quality as with mixed gas. This creates 40% savings in gas costs.

Productive sheet and position welding with WiseThin+

Optimized short arc process suitable for welding sheet metals and thicker plates in position welding, even in case of wider gaps and gap variations. Produces a spatterless arc with precise digital control.

Related blogs

Welding industry – 6 ways to save energy

Welding industry – 6 ways to save energy

The energy crisis is real, and it is here now. It affects the energy-intensive welding industry because welding refers to the uniting or fusing of pieces by using heat and/or compression so that the pieces form a continuum, thus consuming plenty of energy. How can we cut energy consumption in the welding industry? Unless we're prepared to weld by candlelight, we cannot simply refuse to weld until the energy crisis is over. But there is a solution, small changes to daily work can result in significant energy savings in the long run.

Energy saving, Industrial welding, Welding process, Welding production

How does steel welding benefit from special processes?

How does steel welding benefit from special processes?

Welding mild steels may often be considered a simple task. However, welding these steels has specific characteristics that can make the welding process challenging.

Steel welding, MIG/MAG welding

Welding value with X5 FastMig

Welding value with X5 FastMig

Small improvements in welding efficiency can positively influence overall productivity and establish valuable cost savings. By investing in robust, reliable, and versatile equipment, you can improve and better manage welding project costs.

Ergonomics, Industrial welding, WeldEye, Welding cost management, X5 FastMig

Digitalization has marked Kari Kemppi's eventful career

Digitalization has marked Kari Kemppi's eventful career

Kari Kemppi, who just retired this summer, has seen in his 40 years of work how an arc welding equipment manufacturing company founded by his uncle Martti Kemppi has become an international pioneer in the welding industry.

Arc welding, Welding management software, Welding technology, History, Product development

Pioneering is a state-of-mind – now and 25 years ago

Pioneering is a state-of-mind – now and 25 years ago

Experimenting with different ideas, fast and small, then scaling up boldly and even faster - this is my experience of pioneering after a couple of months as Chief Digital Officer at Kemppi. Experimenting was present at Kemppi already 25 years ago, when we developed a new, numeric way to manage arc characteristics and invented the first digital welding power source in the world.

Cloud service, IIoT, Industry 4.0, Internet of welding, IoT, History

New Kemppi Robotics Team

New Kemppi Robotics Team

Achieving strategic goals and enhancing customer experience

Automated welding, Robotic welding, User experience

How to choose the MIG/MAG welding torch

How to choose the MIG/MAG welding torch

MIG/MAG welding is one of the most common and versatile welding processes. It is used for various applications, such as automotive, construction, fabrication, and maintenance. However, choosing a suitable welding torch for your job is essential to achieve optimal results.

Flexlite, MIG torch, MIG/MAG welding

Subscribe to our newsletter and be among the first to know the latest from Kemppi.

By subscribing, you agree to receive marketing emails from Kemppi.

The forerunners of arc welding

Kemppi is the design leader of the arc welding industry. Kemppi is the design leader in the arc welding industry. We are committed to boosting the quality and productivity of welding by continuous development of the welding arc and by working for a greener and more equal world. Kemppi supplies sustainable products, digital solutions, and services for professionals from industrial welding companies to single contractors. The usability and reliability of our products is our guiding principle. We operate with a highly skilled partner network covering over 70 countries to make its expertise locally available. Headquartered in Lahti, Finland, Kemppi employs over 650 professionals in 16 countries and has a revenue of 209 MEUR in 2023.

Kemppi – Designed for welders

Copyright © 2024 Kemppi Oy