Kemppi-hero-3048x1242px-Tubificio-Flexlite-GXe.jpg

Tubificio Lombardo S.r.l.

The efficiency and reliability of well welded pipelines

Steel tubes and pipe systems welded with Flexlite GXe welding torch

Company

Tubificio Lombardo S.r.l.

Website

tubilomb.it

Industry

Steel construction and structures

Location

Lombardia, Italy

Base material

Fe

Tubificio Lombardo, is an Italian leading European carbon steel tube manufacturer. For the production, they rely on Kemppi’s MIG/MAG torch Flexlite GX to tackle successfully welding challenges of tube/tube head welding with up to 350 A, ensuring international standards and high-quality are met. Now, they have pilot-tested Kemppi’s improved line Flexlite GXe, and the results are impressive.

Established in 1994 as a family-owned business, Tubificio Lombardo is one of Europe's leading enterprises in the manufacturing of welded carbon steel tubes. 70% of their production of steel pipe systems and tubes is exported globally. Based in Mantova, Italy, they have a 45,000 square meter facility with ten professionally trained welders, among other employees.Their steel pipe systems and tubes are used for the following applications: tunnels, bridges, heating and ventilation, snowmaking, heating exchangers, radiant tubes, and many others. They do certified manual welding with Kemppi Flexlite GX MIG torches and robotic welding with Kemppi’s A7 MIG Welder robot welding system.

We had high expectations for the new Flexlite GXe model. Compared to the previous version in ease of use and reliability, the new torch easily mastered high and constant amperage use cases. Considering the welding cycle time it takes to make a full turn, torches tend to get very hot, but with this one, we had no problems.
Ing. Michele Scaglioni,Quality and Production Manager

Pipe and tube welding with high amprerages

Tubificio Lombardo faces several challenges when welding tubes and pipes. With special emphasis on ensuring high-quality products for their diverse customer base, their main challenge lies in the welding process, where they perform tube/tube head welding with high amperage requirements for pipes with substantial thickness. Their welding process can reach almost 350 A using 1.2 mm carbon steel wire.

To meet the needs of their typical customers, which include construction sites involved in projects like tunnels and metros, Tubificio Lombardo follows specific quality standards. They hold PED (Pressure Equipment Directive) certification because of the wide pressure range that their tubes are exposed to. The pressure values they work with range from 5 bar to almost 50-60 bar. This certification ensures their welds are sealed to meet the internationally recognized PED A2 standard from Bureau Veritas Italy. One of their competitive advantages is their ability to provide comprehensive services, including welding, cutting, and grinding. They are unique because they do more than manufacture pipes. This results in reliable, high-quality products that meet the highest pressure, fluid discharge, and water passage standards. The Quicklock system enables all of this, which allows fast pipeline splicing.

Flexlite GXe torch easily mastered high and constant amperage use cases at Tubificio Lombardo.

Flexlite GXe torch easily mastered high and constant amperage use cases at Tubificio Lombardo.

Flexlite GXe welding torch has enhanced cooling features.

Flexlite GXe welding torch has enhanced cooling features.

Tubificio Lombardo welds tubes and pipes.

Tubificio Lombardo welds tubes and pipes.

Tubificio Lombardo piloted Flexlite GXe MIG/MAG torch for two weeks.

Tubificio Lombardo piloted Flexlite GXe MIG/MAG torch for two weeks.

Example of the welded piece done with Flexlite GXe torch.

Example of the welded piece done with Flexlite GXe torch.

Pilot-testing the new Flexlite GXe MIG/MAG welding torch

A two-week pilot trial of Kemppi's new MIG/MAG welding torch, the Flexlite GXe, was conducted by Tubificio Lombardo, with the main focus being its performance for welding tubes and pipes. They operated the torch at an amperage of around 270–280 A with 1.2 mm wire while welding a 610 mm-diameter, 20 mm-thickness pipe. The trial included double welding, both internally and externally. The expectations for the new product were high as they had experience with the previous Flexlite GX welding torch model. The welder who conducted the trial said:“Compared to the previous GX 503 version, the Flexlite GXe impressed me with its ease of use and reliability, specifically for higher and consistent amperage levels.”Despite the torch's continuous operation, which involved almost 8-10 minutes to complete a full rotation, it did not overheat, and the feedback was positive. The torch's arc performance, in terms of inclination and curvature, was considered excellent, being more stable and straighter than the previous model. The operator also highlighted the torch's lightweight and manageable design with a flexible cable that reduced resistance, making it comfortable to use during long working hours. The trial focused on welding 24-inch pipes, and it was used extensively for hours throughout the day, proving its efficiency, comfort, and adaptability to different welding scenarios.

Featured Solutions

Flexlite GXe

Product family

The Flexlite GXe is a reliable, high-quality MIG/MAG torch series with optimized ergonomics and excellent welding performance. The improved structure enables a longer, cost-efficient lifetime for both the torch and consumables, proved by a 6-month warranty.

Subscribe to our newsletter and be among the first to know the latest from Kemppi.

By subscribing, you agree to receive marketing emails from Kemppi.

The forerunners of arc welding

Kemppi is the design leader of the arc welding industry. Kemppi is the design leader in the arc welding industry. We are committed to boosting the quality and productivity of welding by continuous development of the welding arc and by working for a greener and more equal world. Kemppi supplies sustainable products, digital solutions, and services for professionals from industrial welding companies to single contractors. The usability and reliability of our products is our guiding principle. We operate with a highly skilled partner network covering over 70 countries to make its expertise locally available. Headquartered in Lahti, Finland, Kemppi employs over 650 professionals in 16 countries and has a revenue of 209 MEUR in 2023.

Kemppi – Designed for welders

Copyright © 2024 Kemppi Oy