Svejsningens ABC
How to use a welding particle filter
24. marts 2024
Learn about the particulate filter in your welding respirator
Welding Value
WHAT IS A WELDING PARTICLE FILTER?
A particulate filter is responsible for capturing airborne particles and helping maintain positive breathing pressure as air moves through a welding respirator.
It sits inside the filter unit alongside a prefilter, a gas filter, or an optional odor filter. To increase welding safety, using a fresh particle filter is strongly recommended.
Filter cover
Spark arrester
Pre-filter
Particle filter
Odor filter: Removes unpleasant odors. Optional accessory. Do not use if a gas filter is present
Gas filter: Removes gases and vapors
WHEN SHOULD A PARTICLE FILTER BE CHANGED?
In a typical industrial work environment, a welding particle filter should be changed once a month. However, if the working conditions are extremely dirty, Kemppi recommends changing the particulate filter in the respirator after every work shift.
Do not wait for the 'change filter' alarm on a welding respirator. This warning indicates that the performance of your welding particle filter is already seriously compromised.
The peace of mind and long-term health benefits of breathing safe air far outweigh the relatively small cost of changing your particle filters regularly.
THREE REASONS TO CHANGE YOUR PARTICLE FILTERS
1. IMPROVE WELDING SAFETY
Changing particle filters regularly ensures that the respirator delivers fresh air into the helmet for long-term welding safety and a better work experience.
2. OPTIMIZE RESPIRATOR PERFORMANCE
A clogged particulate filter changes the back pressure in a welding respirator and forces the mechanical parts inside to wear out faster than normal.
3. INCREASE PRODUCTIVITY
A fresh welding particle filter maintains efficient airflow and prevents excessive fan use that hurts productivity by draining the battery faster.
HOW DO YOU CHANGE A WELDING PARTICLE FILTER FOR KEMPPI PFU210E
Never attempt to clean a particulate filter. Blowing pressurized air into a particle filter can degrade its performance and potentially damage your welding respirator.
CHANGING WELDING RESPIRATOR FILTERS:
Press the 'open' button to remove the filter unit cover
Check the condition of all filters (sometimes just the prefilter is dirty)
Remove clogged filters
Place the new filter in the correct place (make sure it fits tightly)
Attach the blower unit cover
Carefully push the hinged side into place
Using a welding particle filter correctly improves welding safety while also maximizing the performance and effective lifespan of a welding respirator.
Welding Value
Welding Value is a corporate blog hosted by Kemppi Oy. Its main purpose is to evoke discussion on the transformation of modern welding, and bring you the latest stories from within the global welding industry told by true experts in their respective fields.
Relaterede produkter
Produktfamilie
Gamma GTH3 friskluftmodellerne opfylder de højeste EU-klassifikationskrav til ydeevne for friskluftapparater (TH3), der beskytter dig mod 99,8 % af de luftbårne røggasser og partikler. Kan leveres med batteridrevet motorfilter og regulerbare friskluftmodeller.
Produktfamilie
Zeta Fresh Air er et komplet system til åndedrætsbeskyttelse, som omfatter en let svejse- og skærehjelm og et certificeret Kemppi-åndedrætsværn.
Produktfamilie
Zeta Fresh Air G er et komplet system til åndedrætsbeskyttelse, som består af en velafbalanceret slibehjelm med stort visir og et certificeret Kemppi-åndedrætsværn.
Flere blogindlæg
Sikkerhed og farer ved svejsning
Derfor er svejsesikkerhed vigtig, og sådan undgår du de mest udbredte svejsefarer
Svejsningens ABC
MIG/MAG svejsning
MIG-svejseopgaver, -udstyr og -teknikker
Svejsningens ABC
Elektrodesvejsning
Anvendelsesformål, udstyr, elektroder og teknikker til elektrodesvejsning
Svejsningens ABC
Eila Hiltunen – The Poetry of Material
Eila Hiltunen (1922–2003) was one of the most internationally renowned Finnish sculptors of her time. She extensively used welding in her artworks, a technique she mastered in the late 1950s.
Mennesker
Expert insights: Choosing welding helmets and respiratory protection – prioritizing safety over cost
Selecting the right welding helmet and respiratory protection system is crucial for protecting welders in high-risk environments. While cost may factor into decisions, the need for effective, high-quality protection should always come first.
Sikkerhed, Mennesker
How does steel welding benefit from special processes?
Welding mild steels may often be considered a simple task. However, welding these steels has specific characteristics that can make the welding process challenging.
Manuel svejsning, Svejsningens ABC
